BIG NINE XT-EDITION

Features BIG NINE XT-EDITION

• 

  RACELITE 61 ALUMINIUM

  We use a minimum of 6061 grade aluminium on all our bikes. It’s particularly well suited to being shaped with our hydroforming and technoforming processes, which allow us to vary the wall thickness to create double-butted tubing and complex frame shapes. It’s also an alloy that welds easily, and once it has been carefully heat treated to maximise strength, it means we can create strong and lightweight bicycle frames for you to enjoy.

• 

  TFS - TECHNO FORMING SYSTEM

  Technoforming is a mechanical forming process, shaping the tubes by using negative moulds, at times combined with an internal metal core.

• 

  X-TAPER HEADTUBE

  Steering precision is vital to safe and confident handling, and the X-TAPER HEADTUBE allows us to significantly boost this precision. A larger headset diameter at the bottom paired with a smaller one at the top helps to deal with the strains modern riding and equipment can put on the headtube, all without adding unnecessary weight. It allows tapered forks to be fitted with ease and delivers precise and confidence-inspiring steering.

• 

  SMOOTH-WELDING

  This is a process we use to give a nice flat finish to our welds instead of the scaled, 'stack of coins' effect TIG welded joints often have. The welder uses the welding torch to go over the joint twice, helping to smooth out the filler material. It takes a lot of skill to do this, but it delivers strong and smart-looking frames that have the appearance of a carbon fibre frame at first look.

• 

  INTERNAL CABLE ROUTING

  On the majority of our frames, we run the gear and brake cables and hoses through the frame. The cables enter and exit the frame through smooth sockets, or we use one of our other systems like SMART ENTRY or WIRE PORT to be routed through. Running the cables inside the frame protects them from the elements, gives a clean and neat look and can offer aerodynamic advantages.

• 

  DOWN TUBE EXIT

  DOWN TUBE EXIT is a feature seen on some of our frames with internally routed cables. By slightly overlapping the downtube where it connects to the bottom bracket, it leaves a small space that allows cables to exit easily. This means they are easily accessible for routine maintenance or replacement, but it prevents excessive movement and noise that can cause wear and distraction.

• 

  REMOTE LOCK-OUT

  De voorvork en/of achterdemper van je MERIDA-fiets kunnen eenvoudig met een afstandsbediening vanaf het stuur worden geblokkeerd. Optimaal voor (race)bikers die razendsnel tussen de open en gesloten modus willen wisselen.

• 

  POST-MOUNT DISC

  Door de directe bevestiging van de Postmount remklauw aan de dropouts wordt het uitlijnen van de remklauwen makkelijker. Door verschillende adapters te gebruiken kunnen verschillende diameters van remschijven worden gebruikt.

• 

  C-S POST MOUNT DISC

  Door de remklauw aan de binnenkant van het frame te monteren kunnen de krachten beter op de ideale manier in het frame verdeeld worden en zit de remklauw beter beschermd tegen beschadigingen. Daarnaast geeft de interne kabelvoering een cleane look.

• 

  15-100 THRU-AXLE

  Steekassen zorgen niet alleen voor een hogere torsiestijfheid. Ze zorgen ook voor het makkelijk wisselen van wiel en een altijd perfect uitgelijnde remschijf. MERIDA kiest voor 12 mm steekassen voor de achterwielen en 15 mm voor de voorwielen,.

• 

  F-MOUNT

  Being able to turn your bike into an all-weather commuter that has mudguards and other fittings can be a real plus, in particular when riding on wet and perhaps muddy roads and tracks on a regular basis. To make fitting easy, some of our bikes are F-MOUNT equipped. These integrated fittings mounts make adding mudguards fast and simple. Please note that some bikes require model-specific mudguards.

• 

  K-MOUNT

  When using your bike in an urban environment, where you might not always have the option to use a specific bike stand, a kickstand is an ideal solution to park your bike safely. Some of our bikes come with a neatly integrated K-MOUNT, which makes fitting a MERIDA kickstand (or any commercial kickstand) easy. And if you don’t want to have a kickstand and prefer the clean appearance of your frame, the K-MOUNT is neatly tucked away underneath your chainstay, difficult to spot if you don’t know it is there.

• 

  C-MOUNT

  Similar to our F-MOUNT, where various fixing points for mudguards are part of the frame offering, the C-MOUNT equipped bikes have the fixing points for a rear rack already integrated, making fitting fast, simple and reliable. The C-MOUNTS are an additional feature that improves the day-to-day versatility by adding loading capacity to your bike, ideal for commuting and shopping trips. Please note that some bikes require model-specific rear racks.

Geometries Big Nine XT-Edition Black/Silver

Sizes	S	M	L	XL	XXL
Top Tube length -TT (mm) :	570	590	610	630	650
Seatpost Tube - ST (mm) :	370	430	470	510	560
Seat Stay - CS (mm) :	440	440	440	440	440
Head Tube Angle - HTA (°) :	70	70	70	70	70
Seatpost tube angle - STA (°) :	73	73	73	73	73
Bottom bracket drop - BD (mm) :	60	60	60	60	60
Head Tube length - HT (mm) :	100	115	130	145	160
Fork length - FO (mm) :	506	506	506	506	506
Reach - R (mm) :	382	398	414	429	445
Stack - S (mm) :	614	628	642	656	670
Wheelbase - WB (mm) :	1069	1090	1110	1131	1152
Stand over height - SH (mm) :	679	727	763	800	843