JULIET 7 XT-EDITION

Features JULIET 7 XT-EDITION

• 

  RACELITE 61 ALUMINIUM

  We use a minimum of 6061 grade aluminium on all our bikes. It’s particularly well suited to being shaped with our hydroforming and technoforming processes, which allow us to vary the wall thickness to create double-butted tubing and complex frame shapes. It’s also an alloy that welds easily, and once it has been carefully heat treated to maximise strength, it means we can create strong and lightweight bicycle frames for you to enjoy.

• 

  TFS - TECHNO FORMING SYSTEM

  Technoforming is a mechanical forming process, shaping the tubes by using negative moulds, at times combined with an internal metal core.

• 

  SMOOTH-WELDING

  This is a process we use to give a nice flat finish to our welds instead of the scaled, 'stack of coins' effect TIG welded joints often have. The welder uses the welding torch to go over the joint twice, helping to smooth out the filler material. It takes a lot of skill to do this, but it delivers strong and smart-looking frames that have the appearance of a carbon fibre frame at first look.

• 

  INTERNAL CABLE ROUTING

  On the majority of our frames, we run the gear and brake cables and hoses through the frame. The cables enter and exit the frame through smooth sockets, or we use one of our other systems like SMART ENTRY or WIRE PORT to be routed through. Running the cables inside the frame protects them from the elements, gives a clean and neat look and can offer aerodynamic advantages.

• 

  DOWN TUBE EXIT

  DOWN TUBE EXIT is a feature seen on some of our frames with internally routed cables. By slightly overlapping the downtube where it connects to the bottom bracket, it leaves a small space that allows cables to exit easily. This means they are easily accessible for routine maintenance or replacement, but it prevents excessive movement and noise that can cause wear and distraction.

• 

  SMART ENTRY

  Many of our frames offer internal cable routing, where the gear and brake cables are run through the frame for maximum protection and a clean look. Some internally run cables can rattle when riding over uneven surfaces, but our SMART ENTRY system prevents this from happening. Cables, housings and brake hoses are clamped under tension to prevent noisy cable movement. All inlets are completely interchangeable to deal with any kind of cable or wire.

• 

  REMOTE LOCK-OUT

  De voorvork en/of achterdemper van je MERIDA-fiets kunnen eenvoudig met een afstandsbediening vanaf het stuur worden geblokkeerd. Optimaal voor (race)bikers die razendsnel tussen de open en gesloten modus willen wisselen.

• 

  POST-MOUNT DISC

  Door de directe bevestiging van de Postmount remklauw aan de dropouts wordt het uitlijnen van de remklauwen makkelijker. Door verschillende adapters te gebruiken kunnen verschillende diameters van remschijven worden gebruikt.

• 

  K-MOUNT

  When using your bike in an urban environment, where you might not always have the option to use a specific bike stand, a kickstand is an ideal solution to park your bike safely. Some of our bikes come with a neatly integrated K-MOUNT, which makes fitting a MERIDA kickstand (or any commercial kickstand) easy. And if you don’t want to have a kickstand and prefer the clean appearance of your frame, the K-MOUNT is neatly tucked away underneath your chainstay, difficult to spot if you don’t know it is there.

• 

  C-MOUNT

  Similar to our F-MOUNT, where various fixing points for mudguards are part of the frame offering, the C-MOUNT equipped bikes have the fixing points for a rear rack already integrated, making fitting fast, simple and reliable. The C-MOUNTS are an additional feature that improves the day-to-day versatility by adding loading capacity to your bike, ideal for commuting and shopping trips. Please note that some bikes require model-specific rear racks.

Geometries JULIET 7 XT-EDITION zwart

Sizes	13.5	15	17	18.5	20
Top Tube length -TT (mm) :	550	560	575	585	595
Seatpost Tube - ST (mm) :	343	381	432	470	508
Seat Stay - CS (mm) :	430	430	430	430	430
Head Tube Angle - HTA (°) :	69.5	69.5	70	70	70
Seatpost tube angle - STA (°) :	74.5	74.5	74.5	74.5	74.5
Bottom bracket drop - BD (mm) :	63	63	63	63	63
Head Tube length - HT (mm) :	95	100	105	115	125
Fork length - FO (mm) :	493	493	493	493	493
Reach - R (mm) :	384	392	405	413	420
Stack - S (mm) :	600	605	612	621	630
Wheelbase - WB (mm) :	1051	1062	1072	1083	1094
Stand over height - SH (mm) :	603	635	686	715	744